Need some help with this Vin.
#1
04-16-2007, 04:05 PM
Join Date: May 2005
Location: san antonio
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Need some help with this Vin.
Guys I'm thinking about buying another salvage f-150 to rebuild. I'm going to buy it off Ridesafely and they only give a portion of the Vin:1FTPW12585K. I was wondering if someone could tell me if this is a 5.4L 4x4 vehicle. They say it’s a 2005 f-150 screw and it shows it’s a king ranch addition. But I can't tell from the pictures if it’s a 5.4 or 4.6 2 or 4 wheel driver vehicle. Thanks in Advance. If I've posted in the wrong place please move this thread.MP
#2
04-16-2007, 04:53 PM
There is enough to get your answers but I only have data for an 02.
The P = GVWR 7001 to 8000 lbs.
The W12 is the identifier of 4x2 or 4x4. I don't have that number for 05.
The 5 is the engine ID. I don't have that either.
The 8 is a gov. id #.
The 5 is the year 2005.
The K is Kansas plant build.
Someone with later data can give you the motor and drive train type.
The P = GVWR 7001 to 8000 lbs.
The W12 is the identifier of 4x2 or 4x4. I don't have that number for 05.
The 5 is the engine ID. I don't have that either.
The 8 is a gov. id #.
The 5 is the year 2005.
The K is Kansas plant build.
Someone with later data can give you the motor and drive train type.
#3
04-16-2007, 05:32 PM
Senior Member
Join Date: Aug 2006
Location: Mount Laurel, NJ
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
This information came from the Ford Fleet website. It's the quickest place (I think) to find a lot of information you might be interested in.
1FT - Ford USA truck completed vehicle
P - 7,001 - 8,000 lb. GVW
W12 - F-series 4x2 Screw Styleside
5 - 3 valve 5.4 SOHC
8 - check digit
5 - 2005 Model year
K - Kansas City plant
1FT - Ford USA truck completed vehicle
P - 7,001 - 8,000 lb. GVW
W12 - F-series 4x2 Screw Styleside
5 - 3 valve 5.4 SOHC
8 - check digit
5 - 2005 Model year
K - Kansas City plant
