does anyone know if the plenum off a V10 will fit onto the intake manifold of the 4.6/5.4L...... if so or if its modible would be a good thing for me to look into since the TB's are limited to 75mm. and the ones for the V10's are much larger.

 

4.6 Plenum- 8 Cylinders, 8 plenum holes

V-10-10 Cylinders, 10 plenum holes

Figure that one out yourself

 

so the intake elbow it different? ur thinking of the upper manifiold. i'm talking about the peice that connects the throttle body to the manifold

 

I'm not 100% on this, but I believe the intake elbow bolt hole configuration (connects TB to manifold) on the V-10 is larger than the 5.4/4.6 manifolds.

 

aww damn it was good thought atleast... im sure i could make a spacer out of some plastic to mount it up. or just go the neal way make my own intake manifold. but me and dad were talking about doing that making it old style 4 barrel. lol 4 TB one TPS and some all thread to link the TB's so they open all same time. but heh thx for the input guys