MAF change
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 496
Likes: 0
From: Chicago Burbs
MAF change
I'm considering a Lightning 90mm MAF for my 01 5.4. (The other board has a group buy going on for the next few days.) Current mods are Troyer e-fans, ASP pulleys, 1715 tuner, Roush air intake, 75mm throttle body, TransGo, 4.10 gear, Magnaflow muffler and Y pipe on 3" Bassani pipe.
Will the Lightning MAF fit w/o a lot of chopping or otherwise eliminating the rest of the cold air intake?
Question #2 is would it be worthwhile for my mods? I realize a 9100 or chip would also be required.
Thanx for any help.
Larry
Will the Lightning MAF fit w/o a lot of chopping or otherwise eliminating the rest of the cold air intake?
Question #2 is would it be worthwhile for my mods? I realize a 9100 or chip would also be required.
Thanx for any help.
Larry
Technical Article Contributor
Joined: Oct 2003
Posts: 1,490
Likes: 0
From: Topeka Kansas
Originally posted by jstang
On a stock 5.4? why? its not hampering airflow now. Stock meter is good for 300-325Hp and close to 500CFM. It would be a waste.
On a stock 5.4? why? its not hampering airflow now. Stock meter is good for 300-325Hp and close to 500CFM. It would be a waste.
Kind of makes me think of a howitzer.