In the middle of rebuilding the valve body on my '04 F150 SuperCrew 4X4 (I dont know if it has the 4R70W or the 4R75W)

I'm 100% certain this transmission has never been opened - Ford dealership was no help!

I've got two modulator valves and springs that fit into the same hole, which one goes first?

The springs in question are
- #10 (3-4 Capacity Modulator Valve)
- #11 (LOW Servo Modulator Valve)

I've got a blue spring and a yellow spring. The blue one is longer, but softer.
Which one goes where?

 

Watching a transgo video, not sure if their springs are aftermarket, but it sure looks like the OUTSIDE (Low Servo Modulator) spring is yellow, while the inside is blue