transmission cooler install
Thread Starter
|
Senior Member
Joined: Aug 2003
Posts: 197
Likes: 0
From: Langley, BC, Canada
transmission cooler install
on a 4r70w that did not come with a transmission cooler where do i hook up the lines. i took a quick look at the transmission and nothing obvious jumped out at me.
any help or pics would be appreciated.
any help or pics would be appreciated.
Senior Member
Joined: Jul 2004
Posts: 1,380
Likes: 0
From: cincinnati
Originally Posted by Sparky604
on a 4r70w that did not come with a transmission cooler where do i hook up the lines. i took a quick look at the transmission and nothing obvious jumped out at me.
any help or pics would be appreciated.
any help or pics would be appreciated.
Alan
Thread Starter
|
Senior Member
Joined: Aug 2003
Posts: 197
Likes: 0
From: Langley, BC, Canada
which lines are you referring to? the ones that run to the cooler?
that part i'm fine with. the question i'm asking is where on the transmission do i hook it up? there are no lines there to cut and flare right now.
that part i'm fine with. the question i'm asking is where on the transmission do i hook it up? there are no lines there to cut and flare right now.
Senior Member
Joined: Dec 2000
Posts: 418
Likes: 0
From: miami florida u.s.
Sparky604,
I just put one on my 01' screw.The external cooler needs to be tied into the tranny return line coming from the radiator,its the lower one.Shortly after exiting the rad,the aluminum line has a short rubber line in it,mine did at least.I just sliced it w/ a razor and connected both ends to the cooler w/barbed hose fittings and hose clamps.
I just put one on my 01' screw.The external cooler needs to be tied into the tranny return line coming from the radiator,its the lower one.Shortly after exiting the rad,the aluminum line has a short rubber line in it,mine did at least.I just sliced it w/ a razor and connected both ends to the cooler w/barbed hose fittings and hose clamps.