Hard shift problem fixed

Thread Tools
 
Search this Thread
 
Old Feb 22, 2006 | 04:09 PM
  #1  
OOOOF150OOOO's Avatar
Thread Starter
|
Member
Joined: Nov 2005
Posts: 11
Likes: 0
From: South Lake Tahoe
Thumbs up Hard shift problem fixed

Hello All,

Well the hard shift problem has been fixed by a local tranny shop at the tune of $685.

Seems theres a solenoid block that houses the gear lock-ups. Well the solenoid for the torque converter lock-up was worn out.
Apparently the converter wasn't locking up as the solenoid was sticking open.
So the solenoid block had to be replaced because the solenoids aren't removeable. So all new solenoids and no more hard shifts.
Sorry for the lack of technical terms but I'm just a lowly estimator....

At least the stealer didn't get me for a new tranny

Paul
 
Reply
Old Feb 22, 2006 | 05:22 PM
  #2  
Whapt's Avatar
Senior Member
Joined: Dec 2005
Posts: 191
Likes: 0
From: Ohio
glad you saved a lot of money. the tcc switch in my car did that but it would just get stuck in drive and wouldn't down shift
 
Reply
Old Feb 22, 2006 | 06:24 PM
  #3  
bigtruck311's Avatar
Senior Member
Joined: Jul 2004
Posts: 3,105
Likes: 4
From: oceanside C.A.
damn $685, i geuse it could have been worse glad you got it fixed
 
Reply




All times are GMT -4. The time now is 08:16 AM.