Stange binding noise at WOT ?
#1
03-25-2003, 09:45 AM
Join Date: Jan 2003
Location: Eastern PA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Stange binding noise at WOT ?
Anybody have this problem?
I recently installed a superchip in my 2001 5.4L SCab (4x4 w/ stock auto trans). Now when I open the throttle all the way from a stoplight, during the shift from 1st to 2nd, I hear a faint binding noise. Im guessing its the clutch. I only hear it at full throttle. During "normal" use the trans shifts at way lower RPM. At WOT, it seems to shift at around 5000.
Is something wrong here or should I just expect to push the trans to the max when I floor it?
Mods so far are; superchip, MAC cold air intake, and a Gibson sweptside cat back system.
Anything I can do to "beef" up my trans so i dont kill it with agressive shifts?
Please
I recently installed a superchip in my 2001 5.4L SCab (4x4 w/ stock auto trans). Now when I open the throttle all the way from a stoplight, during the shift from 1st to 2nd, I hear a faint binding noise. Im guessing its the clutch. I only hear it at full throttle. During "normal" use the trans shifts at way lower RPM. At WOT, it seems to shift at around 5000.
Is something wrong here or should I just expect to push the trans to the max when I floor it?
Mods so far are; superchip, MAC cold air intake, and a Gibson sweptside cat back system.
Anything I can do to "beef" up my trans so i dont kill it with agressive shifts?
Please
Last edited by Macro; 03-26-2003 at 01:50 PM.