Suspension
Sponsored by:
Sponsored by: CARiD

What shocks to use on a lowered screw??

Thread Tools
 
Search this Thread
 
Old Oct 11, 2001 | 01:58 PM
  #1  
Vortech 4door's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2001
Posts: 8
Likes: 0
What shocks to use on a lowered screw??

I have a '01 screw that is about to be dropped on the 2/3 hotchkis setup. The bilstiens bottom out. What else is good. Thanks.

Trevor
 
Reply
Old Oct 11, 2001 | 04:55 PM
  #2  
Alf's Avatar
Alf
Senior Member
Joined: Dec 2000
Posts: 172
Likes: 0
From: USA
I have a set of Doetsche. While doing my research I never came across any comments against this brand. I paid about 40 bucks each. They've been on the truck (with a 3/5 lowering kit) for a year and no problems so far.

Alf
 
Reply
Old Oct 13, 2001 | 02:56 AM
  #3  
veloci's Avatar
Senior Member
Joined: Jun 1999
Posts: 296
Likes: 0
From: arcadia,ca,usa
Cool

I agree with the previous post. i have had the same shocks for a few months, and no complaints here. i like these shocks better than RSX ranchos.
 
Reply
Old Oct 13, 2001 | 04:01 AM
  #4  
2000F150FL's Avatar
Member
Joined: May 2001
Posts: 19
Likes: 0
I am thinking about using the Hotchkis 2/3 drop but was wondering if the ride quality suffered much because of the almost straight rear leaf spring. This Kit lowers the rear without new shackles and hangers...correct? Also will my stock shocks work after the Kit is installed until I can upgrade to better ones? Thanks in advance for your time.

2000
x-cab
 
Reply
Old Oct 15, 2001 | 02:16 PM
  #5  
Vortech 4door's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2001
Posts: 8
Likes: 0
Thanks for the shock info. Where can I get these?

The hotchkis setup is great. The back feels better the front is a little stiffer. I feel the truck would benefit from new shocks. Other than that, it works better

Trevor
 
Reply




All times are GMT -4. The time now is 10:55 AM.