ready to get a 1" daystar or 1.5"AS front level kit. i tow a boat alot and dont want the nose high so i may want to go with rear blocks.if i do the front level what size block should i put in the back?also i will be running 275/70/18 bfg ta kos.with a rear block will it be to much gap in the rear? any help would be great,want to get this stuff ordered this weekend.any pics will help also.truck is 2010 f150 screw xlt 4x4

 

Neither one of those will put you level most likely, I think you'd need at least a .5" more up front to be level. So depending how much that boat weighs and makes you sag you may not need a rear block.

 

ive read where the 1" daystar is making some trucks level and some guys are saying the 1.5" is putting their trucks nose high.not sure what to do.i dont want to add too much then make the 275s look to small.

 

you'll need 2" to sit perfectly level but if you want a litte rake in the back for the boat then the 1.5" will be fine

 

I would love if people would use the sticky i have at the top of the suspension section to do research....

In it you would have found this:
1" day star


2" Level


and about 100 more truck photos w/ specs

 

C'mon man, we put all that time into the sticky just so people wouldn't notice it haha.

 

but making a new thread is so much easier haha

 

ok ive looked at all the pics for the last six months but im still undecided.talk to auto spring and they recommended a 2" level with the aal.only thing im worried about is will the back be to high for the 275 70 18 bfgs. also im kinda concerned how the ride is gonna be. ive read so much stuff my head is spinning.how will the ride be and will the tires look ok?