im putting on a 6" lift on my truck and wandering if anyone has done it and how easy i was

i have a full truck lift a nuematic air gun, compressor almost every tool besides a tourk wrench and a spring compressor

anything i should look for or be careful on doing?

thanks

 

Oh i'm pretty certain that some people around here have done it Myself not included,but if your mechanically inclined, it shouldn't be problem.

 

you're gonna need a torque wrench

 

this.


its easy just take your time on it man

 

Make sure your impact wrench has some good power. I've seen a few 1/2 inch wrenches that could not break loose the 25-27mm bolt on the bottom of the strut before.

It is easy. I yanked a 6 inch kit and installed a 8 inch kit in one day in my driveway.

 

yeah i got a pretty big air compressor and tank i changed a spendel on a 72' chevelle with my impact wrench no problem

 

an impact wrench is a necessity unless you wanna spend a week on it

 

you need a camera to take lots of photos to show us

 

Did mine in my drive way and like everyone has said plus get a set of deep metric sockets in the large sizes. theyll come in handy

 

lol wingman4 ill be sure to post up some pics if i end up doing it myself