JDM Upper and Lower Control arms. With Beltech 2" Drop Spindles.


This should do the trick. Might have to notch just a tiny bit out of the frame but not much at all. Those drop spindles help alot

Sorry for the crappy pics. My digital cam took a dump.

Could very good possibility that i will have the bags on by the weekend

 

I should just come out to MO for a weekend and help get that bitch put back together

 

Hey!! Its not dead in the water just yet pat. But when its all said and done i could give you a list of EVERYTHING you need!

The first thing would be $$

 

not sure if its the same, but looks very similar

 

well some parts i needed to bag this baby didnt come in.

 

I`m not really a fan of lowered trucks but this one catches my eye! congrats on all the hard work it will look great and be mechanically sound when you get through and should last for years to come

 

Well progress is slow. Havent had much time to work on it. But i do have one lower control arm ready to mount a bag. Just have to do some measuring on where to place the upper bag mount. Then ill be half done with the front end

 

Finally its bagged!

Ill get some pics up when i can find my damn camera! maybe a vid too

 

sweet!

 

pics or ****!

lol, jk
looking forward to finally seeing it

 

Well i dont mean the whole truck is back together. the frame is bagged. working on getting some pics and vids up if they turn out ok

 

uggh i need a new digi cam

 

YEEEAHHHHHH.. (watch out sound is kinda nasty)

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/ignKKtfMdzo&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ignKKtfMdzo&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

This project is bad ***!!

 

Very cool!!!