Im getting a 6 inch Fabtech lift and need help.
Thread Starter
|
Member
Joined: Dec 2008
Posts: 12
Likes: 0
From: Connecticut
Im getting a 6 inch Fabtech lift and need help.
I went to a truck place to order a Fabtech lift kit and the guy showed me this one. fts22000bk is this kit all that i need or do i need to order more parts?
Member
Joined: Nov 2008
Posts: 14
Likes: 0
From: Lake Mary, Fl
Kit
Look at the link below, this should be the kit you need, with rear blocks, the front will go higher than the rear. Front 6" and rear probably 4". The only thing that is not included is the front steering stabilizer and I would add thast to the kit.
http://www.4wheelparts.com/Lift-Kits...t_pn=FABKIT200
Happy New Year !!
http://www.4wheelparts.com/Lift-Kits...t_pn=FABKIT200
Happy New Year !!
Member
Joined: Nov 2008
Posts: 14
Likes: 0
From: Lake Mary, Fl
How much was the other guy charging you for the lift? This one at 4wheel parts is $1781 plus the steering stabilizer. I would suggest that you order it by phone and haggle with them on the price.
Good Luck
Good Luck
Member
Joined: Nov 2008
Posts: 14
Likes: 0
From: Lake Mary, Fl
Dang, 1 more thing....
The 98 has torsion bars on it, you can crank them up about 1 1/2" if you want the truck to bulldog somewhat. That will give you about 7 1/2" up front. Just don't forget to have the steering aligned when you are all done.
The 98 has torsion bars on it, you can crank them up about 1 1/2" if you want the truck to bulldog somewhat. That will give you about 7 1/2" up front. Just don't forget to have the steering aligned when you are all done.