Rize and fabtech
Thread Starter
|
Member
Joined: Apr 2007
Posts: 55
Likes: 0
From: GA
Rize and fabtech
If i got the 6" fabtech lift with crossmemeber and with dirt logic's. Would it sit at the same height as the rize.
If not, What would be the best way to get it as the same height?
If not, What would be the best way to get it as the same height?
Senior Member
Joined: Sep 2006
Posts: 362
Likes: 0
A 6in plus 2in cranked coilovers would be the same as an 8in rize. However with an 8in you would have the option of going up an additional 2in with either a spacer or coilovers. What is the biggest you would think you would want to go? I have a 6in Pro Comp, 3in Body Lift, and 2in cranked dirt logics. I think I could fit 39.5x13.5's or 40x13.5s on the right rim with no rubbing.
Senior Member
Joined: Aug 2006
Posts: 1,580
Likes: 0
From: ventura, ca
Originally Posted by kalebarellano
A 6in plus 2in cranked coilovers would be the same as an 8in rize. However with an 8in you would have the option of going up an additional 2in with either a spacer or coilovers. What is the biggest you would think you would want to go? I have a 6in Pro Comp, 3in Body Lift, and 2in cranked dirt logics. I think I could fit 39.5x13.5's or 40x13.5s on the right rim with no rubbing.
