Im right now looking at the 4-5 inch RCD lift kit. Ive heard the RCD makes a nice product. I already have a 3 inch PA body lift and i was thikning of putting this lift ontop of it. I have a 2001 4x4 supercrew and it says that the supercrews only get about 4inches from this lift because of the torsion bars. My question is if i were to get this lift 4 inches and stack it ontop of my body lift, using the same wheels I have not 18x9.5 eagles 102 with 4 5/8 in. backspace, what is the biggest tire that i can fit under this lift?

thanks guys

 

you could fit 37's no prob

 

i think 37s should fit fine. I ordered the 5in RCD for my 02 reg cab last week. I am gonna do that 3in body too. Hopefully it will be here today . I think i am gonna try 38s though.

 

So you guys do think i could fit some 37 13.50 with just the 4 inches i get from rcd and the 3 inch body lift. that would be sick, anyone else with ideas would be awesome.

wandell, whats your advice?

 

I'd stick with a 37x13.50 or slightly narrower.

 

So do you guys think that i could fit a 36 x 15.5 or is my 18x9.5 rim not wide enough for a 15.5. Also do u think that 36x15.5x18 would rub with the rcd and body lift?

thanks in advance

 

I think the rim would work. As for the tire fitting, you should be able to run them as several people have fit 38x15.50's with a 6 inch Fabtech and a 3 inch body lift.