Does this have the spacer with the rancho?

https://www.f150online.com/galleries...8573&anum=7998

In this picture it looks like it isn't level?

https://www.f150online.com/galleries...0320&anum=7998

 

i think the stance looks great, a little higher in the back only slightly

 

The first picture is the Rancho 4" plus 1-1/2" Autospring on 35x12.50 Nitto MGs.

The second picture is just the Rancho 4" on 33x13s Nitto TGs.

 

Any problems with the spacer? Why did you get the spacer? Did you need it to fit the tires or did you just want it level? Was it really unlevel with just the rancho? Shouldn't the rancho level it out since it is 4in in the front and 2.5in rear?

 

Yes, ball joints went out with 20,000 miles. The Rancho sits rear high, stock. It cleared the 35s fine but I wanted more height and a level look. The Rancho comes with a 4" block in the rear, I don't know exactly how much it lifts the front. Im guessing 4" as well since it was un-level. I forgot to add that in the first picture it has a 4-1/2" block as well instead of the 4".

 

spacer tend to add alot of unwanted wear and tear on ball joints and control arms go suspension lift only

 

Thumper, what backspacing did you have with the mud grapplers? And how wide was your rim?