I want to lower my 03 screw , I'd like some feedback ,hows the ride , I have had lowered cars and trucks before , some rode bad some good , I will be running 275-55-20 or 295-50-20 , the bell tech 3"/4" looks to be the best all around , thanks , Ron

 

Well i have a belltech 3/4 drop, but its on my Lightning, not a SC, i like it a lot, it looks very nice, and rides decent, it the road it bumpy it might get a bit annoying, but most of the time its nice. If i had to do it again i would. Hope that helps a bit.

 

Thanks for the feedback , I'll probably be droping it after the holidays , Ron

 

I also have a 3/4 Belltech kit on a reg. cab f150. I like it alot. Sometimes on bumpy roads you gotta be a little careful, but generally it pretty decent and adds much more stability to the vehicle. Oh yeah and the best part is that it looks great! jR

 

Please post back how things went, I might be going with either Belltech or Hotchkis if I don't like the way the 2" shackles I'm going to install look and ride.

 

post some pics when your done i what to do a beltech drop on my f150 curios of how it wold look

 

Ron I had a 2/4 Bell Tech on a 2001 SC I thought it balanced well It would bottom out in the rear over RR tracks w/4 people in it but the front was fine. I was going to put overload air bags in it but i sold it Good luck

 

Hey SoCal SC, do you have the hanger/shackel drop or new leafs in the rear. I am looking to buy the 3/4 drop but with new leafs in the rear. Was the ride pretty smooth with the drop. Let me know.

thanks