Fabtech 3/1/2 performance lift kit. think about add 3" spindles?
Thread Starter
|
Member
Joined: Jan 2001
Posts: 58
Likes: 0
From: California,USA
Fabtech 3/1/2 performance lift kit. think about add 3" spindles?
My question before i add 3" spindles to my already 3 1/2 performance lift kit i have already from fabtech is I have 3" block in the rear already if i add the 3"spindles what do i add to the rearend to compensate for the add 3" spindles? anyone have info on this.
Member
Joined: Feb 2001
Posts: 75
Likes: 0
From: Orlando, FL
Maybe you need to speak to DavenUSA or DGreen, they seem to know more about this. Hope that helps. 
------------------
My Ride:
2000 Flareside EC/SB 4.6 4X2 (Harvest Gold)
Air Raid FIPK/w K&N filter
Gibson Split back duals/w tips
Power Aid throttle body spacer
Westin nerf bars (Black)
Lund vent shades, bug shield
V-Tech tail light covers (painted to match)
Tinted Windows
Factory street flares (painted to match)
Factory grill w/honeycomb insert
(swapped out plain chrome one)
Tow Package (III)
Future Mods:
Fabtech 3 1/2 lift with
Eagle 589's/31-33 inch tires
[This message has been edited by Trippn (edited 02-28-2001).]
------------------
My Ride:
2000 Flareside EC/SB 4.6 4X2 (Harvest Gold)
Air Raid FIPK/w K&N filter
Gibson Split back duals/w tips
Power Aid throttle body spacer
Westin nerf bars (Black)
Lund vent shades, bug shield
V-Tech tail light covers (painted to match)
Tinted Windows
Factory street flares (painted to match)
Factory grill w/honeycomb insert
(swapped out plain chrome one)
Tow Package (III)
Future Mods:
Fabtech 3 1/2 lift with
Eagle 589's/31-33 inch tires
[This message has been edited by Trippn (edited 02-28-2001).]