spindles
#1
spindles
Can anyone tell me who sells or makes a spindle for my truck?
1999, v6, XL, sport, automatic, xtracab, 4dr
------------------
FUTURE MODS: SPINDLES, BODY LIFT, FLOWMASTER, AND SOME TIGHT WHEELS...
GOALS: TO BE ABLE TO CRUISE MEXICALI AND SAN FELIPE WITH NO WORRIES OF BAD ROADS OR 2 FEET DEEP POTHOLES!!!!!!!!
1999, v6, XL, sport, automatic, xtracab, 4dr
------------------
FUTURE MODS: SPINDLES, BODY LIFT, FLOWMASTER, AND SOME TIGHT WHEELS...
GOALS: TO BE ABLE TO CRUISE MEXICALI AND SAN FELIPE WITH NO WORRIES OF BAD ROADS OR 2 FEET DEEP POTHOLES!!!!!!!!
#2
Fabtech who specialize in 4x2 lifts are coming out with a newly redesigned spindle in a 2-3 weeks, I have the 3 1/2 in fabtech lift and waiting for them so I can go higher.
Bullseye also makes them.
but before you buy make sure how high you want to go, I heard mixing and matching may void other companies warrantees...thats why im waiting, darm it..
Dave
------------------
1998 F-150, SC/Flairside,oxford white 4x2,4.6,auto,3.55s,nerf bars,cls 111 towing,bed liner w/mat,atlas polished wheels w/285/75 R/16 BFG A/Ts (black side out),all plastics guards/bug shields,air raid/k & n filter, superchipped, duals out the back corners, flow master 3 chamber, snug top lid, f-150 online sticker back window-honk if you see me!!! Fabtech 3 1/2 lift .coverking dash cover, Lumi Logo's (front and rear), clear front corner lenses, muth mirrors.
San Antonio
DWESSELS89@AOL.COM
Bullseye also makes them.
but before you buy make sure how high you want to go, I heard mixing and matching may void other companies warrantees...thats why im waiting, darm it..
Dave
------------------
1998 F-150, SC/Flairside,oxford white 4x2,4.6,auto,3.55s,nerf bars,cls 111 towing,bed liner w/mat,atlas polished wheels w/285/75 R/16 BFG A/Ts (black side out),all plastics guards/bug shields,air raid/k & n filter, superchipped, duals out the back corners, flow master 3 chamber, snug top lid, f-150 online sticker back window-honk if you see me!!! Fabtech 3 1/2 lift .coverking dash cover, Lumi Logo's (front and rear), clear front corner lenses, muth mirrors.
San Antonio
DWESSELS89@AOL.COM
#3
thanks, i am thinking of going with a 3½ spindle, 2 in body lift, and some 33's,...... would this type of set-up look weak to all you f150 veterans!!!!!!!!!!!!!!!
------------------
FUTURE MODS: SPINDLES,
BODY LIFT, FLOWMASTER,
AND SOME TIGHT WHEELS...
GOALS: TO HAVE A ONE OF A
KIND RIDE!!!!!
Handy4898@webtv.net
------------------
FUTURE MODS: SPINDLES,
BODY LIFT, FLOWMASTER,
AND SOME TIGHT WHEELS...
GOALS: TO HAVE A ONE OF A
KIND RIDE!!!!!
Handy4898@webtv.net
#4
Biddaddyxl,
I have the 3" spindle(procomp/bulleye) and 2" blocks in the back with 285/75/16 and have no complaints. The tires clear all around, but i had to take the front mud guards off because they were rubbing. Besides that i think spindles are the way to go. I tried the coils and hated them. They messed up my ride not to mention all the stress it was applied to the steering rods. I hope this hepls, by the way if you go 285's you do not have to get the body lift.
------------------
Black 99 xlt sc flairside,4.6 2w.d.,50 series flowmaster catback,
superchip,
RS9000 shocks,
3" lift procomp spindles,A/R Phyton 285/75/16 A/T B.F,
Ford 9mm sparkplug wires.
Snug Lid.2 KC daylighters.
FUTURE MODS: LS AND 4.10 GEARS.
I have the 3" spindle(procomp/bulleye) and 2" blocks in the back with 285/75/16 and have no complaints. The tires clear all around, but i had to take the front mud guards off because they were rubbing. Besides that i think spindles are the way to go. I tried the coils and hated them. They messed up my ride not to mention all the stress it was applied to the steering rods. I hope this hepls, by the way if you go 285's you do not have to get the body lift.
------------------
Black 99 xlt sc flairside,4.6 2w.d.,50 series flowmaster catback,
superchip,
RS9000 shocks,
3" lift procomp spindles,A/R Phyton 285/75/16 A/T B.F,
Ford 9mm sparkplug wires.
Snug Lid.2 KC daylighters.
FUTURE MODS: LS AND 4.10 GEARS.