Has anyone had a lift (of any kind: body, spindle, etc) done in the Houston area?

If so, shop recommendations?

tnx!
Gary

 

Yep, 3 lifts done in Houston area, all at 4wheelparts. Had a 96 Surburban with a 3"body lift, a 97 z71 with a 6" procomp, and a 99 Crew Cab Super Duty with a 5" National Spring. 4wheelparts by the dome did all of these lifts, they generally will give you the best price if shop around and tell them the cheapest you found. They will meet anyones price and have a pretty good reputation on doing the job right the first time.

------------------
99 F250SD Black Lariat Crew Cab 4x4, 5inch National Spring lift, 35x15.50 Swampers, 16.5x9.75 Weld Scorpios, Full Billet grill, LIne-X liner, Procomp and Rancho shocks, 40 Series Flowmaster, recalibrated speedo, superchipped,K&N filter,2 JL audio 10's behind rear seat, audio art 6channel amp

 

kind of along the same lines of suspension work, any recommended drop shops in the houston area.i just got back from test driving a 2/4 dropped f150 and the ride was awesome ..it had the belltech kit, with the nitro active shocks...src motorsports 605 for the kit and 350 for labor with realignment..can i do better ????

------------------
99 f-150 xlt,black,s/c flareside,4.6 v8,5-speed manuel,3.55,17" sport rims w/bfg 275/60's,k&n gen II fipk,flowmaster 2-chamber 40 dual exhaust, kenwood kdc-s5009 cd player,kenwood kac-x646 multi channel amp,mb quart dkc113 5.25 speakers front,kenwood excelon x576c speakers rear ,viper 800 alarm,mobil 1 user, superchip wont work (houston,texas): wish list:snuglid hard tonneau,bedrug,belltech 2/3 drop
email: fdelgado@hypercon.com

 

There is a very highly regarded 4 x 4 shop right off of Westheimer, near Hwy 6. It is right across a side street from Pep Boys, kind of tucked into a corner. If you find it, you will know, there are a lot of trucks/jeeps there that are taller than me!

I can't remember the name, but I have done business there and they are good, honest folk. I have seen some of the work they do and all of it is awesome.

As for lowering see Steve Drier at Houston Performance, Hwy 249 & Beltway 8. Another good shop, but you will get what you pay for.

------------------
Chuck 'Wyldman' Shelton
wyldman@houston.rr.com
Black 99.5 Lightning Build # 1273, DOB 5-14-99, NLOC #315
Best run to date 12.857 @103.48
CD Changer; Tow Pkg.; Lojack; Sal's custom nitrous chip; G-Tech/Pro; SnugLid; BedRug; Invinca-Shield, full kit; NOS KIT 100 hp shot (currently); Clear and smoke Lexan fog light covers; 3M Ti Window Tint; Bel radar detector (shouldn't be an accessory); PowerStack cone filter (a.k.a. supercharger waker upper); American Auto Designs ram air hood; Cal-Tracs traction bars; Bassani headers;Goodrich T/A Drag Radials; Muth Signal Mirrors, inbound

 

I haven't had anything done on my F-150 at Houston Performance (just got the F-150!), but I've had over $10 grand worth of stuff done on my Mustang there, and highly recommend them. Michael Sen-Roy, their technical director, is the zen-master of Ford performance, and Steve Drier runs a great business.

rgds,
Gary

 

The place on Westheimer is called Off-Road Unlimited, I've been by there once to talk and they seem pretty good.

There is another place called USA Conversions somewhere off of 1960 on the north side of town that does some work as well. A friend of mine had his 98 F150 4WD lifted there and it turned out good.

 

You might want to try awesome transformations at 249 and 6 or cutten customs on cutten between cypresswood and 6 i think, there is also a good 4wheelparts right there up 6 past kukendayl

------------------
Built Ford Tough
Check out my truck at <A HREF="http://www.geocities.com/fattron/jb.html
" TARGET=_blank>www.geocities.com/fattron/jb.html
</A>