Has anyone installed one of the new 2 inch reciever hitches on the front of their Supercrew? Great for spotting trailers, mounting a winch, whatever. Several companies make them, has anyone done an installation?

------------------

 

Well I just had one custom made for my new Supercrew. The shop did a nice job and cut a hole in the air damn so the receiver is just below the license plate. You really don't notice it unless you really look. I use this to get my boat in/out of my garage.

 

i built one for my screw comes out same place as H2OSkier`s just under licence plate and flush with the front of it needed some way to pull the truck so i made a T reciever that a A frame tow bar will mount too Thanks to a good supply of scrap steel total cost was 0
+paint and 4 bolts makes for a good bumper guard any one that backs into me from either end is going to be sorry 2" square tube at each end hehe crunch

------------------
Ordered 11/8/00
Build Date 11/27/00
Delivery Date 1/06/01
----------------------
XLT 2001 Supercrew
Arizona Beige
5.4
Tow Pk
Captain chairs
*
Ford Duraliner.
Stull Billet Grill
-------------------------
Nothen` Dirty` Going` On`Here`

[This message has been edited by zacky (edited 03-21-2001).]