Head rest complaint form for the NHTSA
Yes,NHTSA called me also.Said they were checking on the no headrest problem.I Gave him an earfull.
------------------
2001 F150 Supercrew Lariat,5.4 Ltr,4x4,Oxford White/Gold,Captain's Chairs,Moonroof,Sliding Rear Window,Skid Plates,Class 3 Hitch,Bed Extender & Limited Slip---------------------------Mods: Are Ls2 Cover,Line-x Bed Liner,Lund Bug Shield,Husky Floor Liners & Westin Cps Step Bars
------------------
2001 F150 Supercrew Lariat,5.4 Ltr,4x4,Oxford White/Gold,Captain's Chairs,Moonroof,Sliding Rear Window,Skid Plates,Class 3 Hitch,Bed Extender & Limited Slip---------------------------Mods: Are Ls2 Cover,Line-x Bed Liner,Lund Bug Shield,Husky Floor Liners & Westin Cps Step Bars
Just submitted the NHSTA report.
Question: Has anyone talked to their Ford dealership yet for seat replacement? They will probably ask us to take a hike.
------------------
2001 SCrew 4x4 Lariat, Deep Wedgewood Blue, All Options, CD/Tape Dual-Media Deck With 6 Disk Changer, Moonroof etc.
Others: Superchip, Airforce One, V1 Radar Detector, Rhino Lining, Ravin Z55, Infinity 572.1cf Speakers.
On the way...ProComp Tires.
Question: Has anyone talked to their Ford dealership yet for seat replacement? They will probably ask us to take a hike.
------------------
2001 SCrew 4x4 Lariat, Deep Wedgewood Blue, All Options, CD/Tape Dual-Media Deck With 6 Disk Changer, Moonroof etc.
Others: Superchip, Airforce One, V1 Radar Detector, Rhino Lining, Ravin Z55, Infinity 572.1cf Speakers.
On the way...ProComp Tires.
Just did my part. Very easy!!!
------------------
2001 SuperCrew XLT- Bright red over silver, Captains, 5.4, 4x4, skid plates, towing pkg, 17"wheels, posi, Westin CPS tube steps, EXTRA FUEL CONSUMPTION PACKAGE!!
------------------
2001 SuperCrew XLT- Bright red over silver, Captains, 5.4, 4x4, skid plates, towing pkg, 17"wheels, posi, Westin CPS tube steps, EXTRA FUEL CONSUMPTION PACKAGE!!
2001,
You Wrote
>This form is great for you Yanks....but >what about us Canucks up here in Canada??
>Let us Canuck's be heard...where is our >form??
I made a comment on the survey they sent me.
Ford called me back in regard to the survey and asked further questions in regard to the headrest. She assured me this complaint was logged and forwarded to the apropriate department. So if we Canucks can't use NHTSA
maybe if they keep hearing it from all directions the pressure may be on.
You Wrote
>This form is great for you Yanks....but >what about us Canucks up here in Canada??
>Let us Canuck's be heard...where is our >form??
I made a comment on the survey they sent me.
Ford called me back in regard to the survey and asked further questions in regard to the headrest. She assured me this complaint was logged and forwarded to the apropriate department. So if we Canucks can't use NHTSA
maybe if they keep hearing it from all directions the pressure may be on.
I just submitted my complaint. I ordered my truck before they were even on the lot. I got one of the first ones in Houston from my dealer. I absolutly love the truck and haven't had one complaint about the truck until know. I wouldn't have even known about if it had not been for this web site! I will definately keep an eye on this site for future updates and/or concerns.
------------------
2001 F150 Supercrew XLT Build Date 02/00
Deep Wedgewood Blue/Silver Frost W/ Med. Graphite Interior
5.4L V-8 Auto, 3.55 LS rearend, rear sliding window, privacy glass, 6 disc cd-changer, captains chairs, tow package.
Mods:
Spray in bedliner, bug deflector
Mods Wanted:
Nerf bars, billet grill, exhaust upgrade, K&N filter and tail light covers.
------------------
2001 F150 Supercrew XLT Build Date 02/00
Deep Wedgewood Blue/Silver Frost W/ Med. Graphite Interior
5.4L V-8 Auto, 3.55 LS rearend, rear sliding window, privacy glass, 6 disc cd-changer, captains chairs, tow package.
Mods:
Spray in bedliner, bug deflector
Mods Wanted:
Nerf bars, billet grill, exhaust upgrade, K&N filter and tail light covers.
Submitted my complaint today! I noticed the lack of rear headrests when I took delivery in early March of my Gen. I Screw. I looked around at all the regular and extended cab trucks from multiple manufacturers w/out protection from the rear window and then queried a friend who works in insurance claims. He wasn't able to find a regulation which required them. I'm afraid this will be our biggest obstacle as a recall would affect many more vehicles than just our Screws. You can't get what you don't ask for though eh?
---------------------
Harvest Gold Lariat Screw, 5.4L, 4X4, towing package, skid plates, 3.55ls, leather captain's chairs, 6cd, slider, moonie, Westin grille, Explorer driving lights, DuraLiner, DashMat, Husky floor liners, SuperChip and K&N Filter.
---------------------
Harvest Gold Lariat Screw, 5.4L, 4X4, towing package, skid plates, 3.55ls, leather captain's chairs, 6cd, slider, moonie, Westin grille, Explorer driving lights, DuraLiner, DashMat, Husky floor liners, SuperChip and K&N Filter.
Anything new on this topic?!? I went to the NHTSA website, and noted a plethora of head rest complaints while looking for anything on the wiper recall. Has anyone had any contact from NHTSA within the last few months, because I agree that the dealer network could care less.
I logged my complaint with NHTSA, but I don't think anything will get done. In the mean time and until I decide what I will do permanently I wedged back pillow between the seat and the window so it sticks up above the seat and protects my little guy some. The back pillow is somewhat wedge shaped so the tapered end easily wedges between the seat and the back window. The other end of the pillow is about 3.5 inches thick and sticks about 12 inches above the back of the seat. The foam is fairly dense so I think it would help some in a rear ender.
Just an idea.
RespK
Just an idea.
RespK
Hey folks,
I don't have a screw yet because I haven't ordered it yet. I agree, for the most part, that you should have head rests on your rear seats. I have a '00 4x4 Super Cab Lariat and it has a rear bench without head rest either.
I don't think Ford will do anything on this issue because I'm sure they built the trucks according to whatever standards were in place at the time of manufacture.
Since they changed the design to include front and rear head rest, they are probably going above and beyond the requirements set forth by current regulations for rear seat passengers in trucks.
If they do decide to change the seats on earlier screws because of the lack or rear head restraints, then imagine what will happen to the Super Cab gang when they get wind of that.
What about the folks with trucks prior to air bags, should they also insist that Ford go back and put air bags in their trucks.
What about trucks built before the advent of seat belts, should they also go back and put them in those vehicles too.
I think I made my point so I stop.
Don't get me wrong, if I had a screw without the head rests I'm sure I would be pissed too but just how far can we take the issue of retrofitting any improvemnts made to future designs into current and past ones?
My $2.00 worth.
DaveMan
I don't have a screw yet because I haven't ordered it yet. I agree, for the most part, that you should have head rests on your rear seats. I have a '00 4x4 Super Cab Lariat and it has a rear bench without head rest either.
I don't think Ford will do anything on this issue because I'm sure they built the trucks according to whatever standards were in place at the time of manufacture.
Since they changed the design to include front and rear head rest, they are probably going above and beyond the requirements set forth by current regulations for rear seat passengers in trucks.
If they do decide to change the seats on earlier screws because of the lack or rear head restraints, then imagine what will happen to the Super Cab gang when they get wind of that.
What about the folks with trucks prior to air bags, should they also insist that Ford go back and put air bags in their trucks.
What about trucks built before the advent of seat belts, should they also go back and put them in those vehicles too.
I think I made my point so I stop.
Don't get me wrong, if I had a screw without the head rests I'm sure I would be pissed too but just how far can we take the issue of retrofitting any improvemnts made to future designs into current and past ones?
My $2.00 worth.
DaveMan


