First of all, this might be the 'stupid question of the year' (granted, we only have a few days left in the year...)... LOL


I got my locking gas cap and really haven't had a chance to go down to the truck and look at how it installs...

The best I can tell, the tether from the old cap will need to be 'snipped' so that I can push the new tether in the hole to hang on to the cap.

Before I try this, is there any trick to this?

THANKS!!

RP

 

If it's similar to my '99 SC, the tether is held in with a rubber grommet. It's easy to pry out with a small screw driver. The new grommet will push in easily. A one minute job.

 

Jimb is right. Just pop the rubber gromet out and it comes right off. Reverse for install.

 

Yup, that's what it looks like. I'm going to go knock it out in a few minutes... thanks for the quick response guys. I really appreciate it!

RP

 

Geesh, that was beyond easy... thanks guys!

I think it'll be a nice addition to my mod aresonal. Always nice to know that a bonehead will have more trouble either stealing my fuel or screwing with my fuel while in the tank.

RP