These should help take advantage of the boost...

Thread Tools
 
Search this Thread
 
Old Sep 1, 2010 | 01:54 PM
  #31  
f150intally's Avatar
Senior Member
Joined: Mar 2001
Posts: 479
Likes: 0
From: Tallahassee, FL
what has been your best 60 ft to date? 1 tenth off your 60 foot is at least 2 tenths at the end of the track. in my previous street car I was bumping the speed limiter at the end of the track all night long and didn't realize why my car was cutting out.... it dawned on me after watching the video after the fact. I ran 5 13.00s and if I would've disconnected the speed sensor from the tranny tail shaft would've been deep in the 12s. 1.70 60 fts
 
Reply
Old Sep 1, 2010 | 02:43 PM
  #32  
Huitt24's Avatar
Senior Member
Joined: Dec 2005
Posts: 1,073
Likes: 0
From: Magnolia,Texas
Originally Posted by FATHERFORD
Are you off this friday?
no I have to work, today is my day off this week. Otherwise I would be following you down there.
 
Reply
Old Sep 1, 2010 | 04:33 PM
  #33  
FATHERFORD's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2002
Posts: 3,102
Likes: 0
From: Waco/Houston
Originally Posted by f150intally
what has been your best 60 ft to date? 1 tenth off your 60 foot is at least 2 tenths at the end of the track. in my previous street car I was bumping the speed limiter at the end of the track all night long and didn't realize why my car was cutting out.... it dawned on me after watching the video after the fact. I ran 5 13.00s and if I would've disconnected the speed sensor from the tranny tail shaft would've been deep in the 12s. 1.70 60 fts

1.89 I think.

I hope to do a 1.6-1.7 now.
 
Reply
Old Sep 1, 2010 | 09:17 PM
  #34  
f150intally's Avatar
Senior Member
Joined: Mar 2001
Posts: 479
Likes: 0
From: Tallahassee, FL
1.89 is really good in these light rear-ended bricks!
 
Reply
Old Sep 2, 2010 | 09:22 AM
  #35  
FATHERFORD's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2002
Posts: 3,102
Likes: 0
From: Waco/Houston
Back on the tire subject....

M&H has a BRAND NEW set of 28x4.5-17 front runners.... They aren't even on the website yet.
 
Reply
Old Sep 7, 2010 | 05:22 PM
  #36  
Stangman701's Avatar
Member
Joined: Aug 2008
Posts: 30
Likes: 0
From: Pittsburgh
So what were the #'s?
 
Reply
Old Sep 25, 2010 | 08:53 PM
  #37  
wrenchbender's Avatar
Member
Joined: Feb 2010
Posts: 86
Likes: 0
From: O-H-I-O
Originally Posted by Crash!
These work and fit well. Easy to install, and they work.

http://www.sfxperformance.com/parts/LAK21715.htm
Will these work on 3 inch leaf springs (as in '04 and up)?
 
Reply
Old Sep 26, 2010 | 12:24 AM
  #38  
FATHERFORD's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2002
Posts: 3,102
Likes: 0
From: Waco/Houston
Originally Posted by Stangman701
So what were the #'s?
If you are asking #'s with slicks I don't know, it's been raining every track day here for over a month.
 
Reply




All times are GMT -4. The time now is 05:26 PM.