I'm guessing the .34 range is where I should start? Any need to go less? Anyone having trouble with blowout at the .34 range?

 

I'm running 18 PSI and I'm in the .34 range!
You could probably go a little more.

Phil

 

.034 works well for me at 13 psi. My TR6s came set at that out of the box- how handy.

 

Blown motor = 0.035" gap.

 

I should be good to go! Thought I'd start off at .034-.035. That's what they are set at, waiting to put them in along with everything else I have sittingin the garage with the vortech and efans, and separator plates, and chip, and fuel pump, and the list goes on..... I need about a week off!!

 

It sounds like it has all come together. Good luck!

 

Still have a few pieces left.....Trying to decide what to do about headers, and exhaust.....BOught my throttle body today, ordering the Mass air meter next week. Trying to decide between the OBX headers and piece together the cats back or get an entire dynatech system and magnaflow cat back system. Think I could save about a grand with the OBX headers and piecing the rest together with a custom shop doing the welding and bending. I like the OBX headers but don't care for the resonators.