Project paint progress thread...
Technical Article Contributor
Joined: Apr 2009
Posts: 608
Likes: 0
My bumper pad pulled off pretty easy when I put my Roush cover on... Much easier than pushing the Roush cover over the bumper, hahaha
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
I have the integrated trailer hitch bumper. Big time pain to do just for the pad, and to not screw it up. I had to swap all the guts from my chrome bumper to the black bumper. Never again will I do that! 
:
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
Well got my tips made. Nothing special really since they they'll be mostly hidden. Going to put the rear skirt on later when the sun isn't shining into my garage.
Stay tuned...
Stay tuned...
Thread Starter
|
Senior Member
Joined: Nov 2005
Posts: 17,118
Likes: 7
From: Burleson, Texas
OK wasn't too bad. Had a local exhaust shop make me some turn downs to replace my Roush tips, they clamp on just like the tips. May have something better done later on because I'll need a larger muffler put on since the headers with the Roush Off Road exhaust is too loud for my 41 year old self. 
The headers Y from a 2.5" to a single 2.5" pipe and my ROR has a 3" inlet. I want the headers to Y into a 3" section into a larger muffler and dump out under the rear bumper with some corsa tips or something.
I'll wash and detail it next weekend and do a good photo shoot somewhere.
Anyway, here goes...
The headers Y from a 2.5" to a single 2.5" pipe and my ROR has a 3" inlet. I want the headers to Y into a 3" section into a larger muffler and dump out under the rear bumper with some corsa tips or something.I'll wash and detail it next weekend and do a good photo shoot somewhere.
Anyway, here goes...
