4/6 Drop On 08 Screw

Reply Subscribe

Thread Tools

Search this Thread

Sep 5, 2010 | 04:08 PM

#16

expedition4x4

Thread Starter

Senior Member

Joined: Nov 2007

Posts: 2,469

Likes: 0

From: Dallas, Texas

so 3/6 is level? I thought that would leave the back sitting lower. So Bankrpt since you have a 4/6 your truck has a slight rake? or is it leveled?

Sep 5, 2010 | 06:05 PM

#17

bankrpt

Senior Member

Joined: Dec 2008

Posts: 3,752

Likes: 0

From: malvern,arkansas

My truck is 4.5/6 and slight rake

Sep 5, 2010 | 06:09 PM

#18

Stealth

Senior Member

Joined: Nov 2005

Posts: 17,118

Likes: 7

From: Burleson, Texas

My 2/4 has around 1/2" of rake.

Sep 7, 2010 | 04:27 AM

#19

hlbbig69

Suspended

Joined: Aug 2009

Posts: 335

Likes: 0

Quote:

Originally Posted by bankrpt

Actually it would be a 3/5 drop because the flip kit comes with lifting shackles. Unless you keep your factory shackles then it would make it 3/6.

again just wanted to point out mine was a5 Inch advertised drop nothing more and nothing less. However because of the longer bed 6.5 rather than 5.5 and the 35.7 upgraded gas tank those two Items create mor weight so instead of a 5" drop I got a 6" No shackles were added to attain this just a 5" bell teck flip kit. S if you have the f 150 screw with a short bed then yes is my guess it would be a 3/5 drop not a 3/6 hope this helps MY 3/5 has a slight rake about 1/2 an in I would say

Hlb

Reply Subscribe

Reply Share

First
Prev
2 / 2
Next
Last