Let the redo begin!

Thread Tools
 
Search this Thread
 
Old Nov 15, 2011 | 06:21 PM
  #541  
digbyz's Avatar
Senior Member
Joined: Dec 2010
Posts: 316
Likes: 0
From: Georgetown, Il.
milt does your trucks bags have air in them in your rear. or sitting the full 5"
 

Last edited by digbyz; Nov 16, 2011 at 12:36 PM.
Reply
Old Nov 21, 2011 | 01:37 PM
  #542  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Looks like you have done quite a bit lately and not told us about it...

 
Reply
Old Nov 21, 2011 | 02:59 PM
  #543  
Milt IV's Avatar
Senior Member
15 Year Member
Joined: Oct 2010
Posts: 1,214
Likes: 1
From: DFW TX
Originally Posted by digbyz
milt does your trucks bags have air in them in your rear. or sitting the full 5"
Depends on what pic you are looking at. Most of them I have no air in the bags and am sitting at 6" of drop. A few of them There is air in there and I'm sitting at 5 1/2" drop.
 
Reply
Old Nov 21, 2011 | 03:00 PM
  #544  
Milt IV's Avatar
Senior Member
15 Year Member
Joined: Oct 2010
Posts: 1,214
Likes: 1
From: DFW TX
Originally Posted by azmidget91
Looks like you have done quite a bit lately and not told us about it...

Is that really JSVO's truck???
 
Reply
Old Nov 21, 2011 | 03:18 PM
  #545  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
I don't think so saw it on another forum and thought it was close to his but no roll pan, and no fog lights. But has red head lights like his (this one has black in it too though)
 
Reply
Old Nov 21, 2011 | 04:49 PM
  #546  
jose_bigred's Avatar
Senior Member
Joined: May 2009
Posts: 378
Likes: 0
From: Dallas
Originally Posted by azmidget91
Looks like you have done quite a bit lately and not told us about it...

Are these boss 330's?

If so i was gonna do that to my truck but flat black face centers with glossy red lip! looks nice IMO!
 
Reply
Old Nov 21, 2011 | 05:11 PM
  #547  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Sure looks like 330's to me
 
Reply
Old Nov 21, 2011 | 05:52 PM
  #548  
Milt IV's Avatar
Senior Member
15 Year Member
Joined: Oct 2010
Posts: 1,214
Likes: 1
From: DFW TX
Originally Posted by azmidget91
I don't think so saw it on another forum and thought it was close to his but no roll pan, and no fog lights. But has red head lights like his (this one has black in it too though)
hahhha I didn't think it was his but it does share some similarities.
Originally Posted by jose_bigred
Are these boss 330's?

If so i was gonna do that to my truck but flat black face centers with glossy red lip! looks nice IMO!
They look like 330s to me.
 
Reply
Old Nov 21, 2011 | 09:40 PM
  #549  
digbyz's Avatar
Senior Member
Joined: Dec 2010
Posts: 316
Likes: 0
From: Georgetown, Il.
Thats unique. very cool. jsvo might have some ideas
 
Reply
Old Nov 22, 2011 | 12:19 AM
  #550  
jsvo5695's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2007
Posts: 1,596
Likes: 0
From: kansas city, missouri
I wish I had the ***** to air mine out......I just don't want to lose the ability to just jump in and go. With the air I have "been there and done that".

Actually, I don't think the front of that one is much lower than my static.

I had the same idea with the head lights. But I am going to keep some chrome in mine. And I love the tonneau he has!
 
Reply
Old Nov 22, 2011 | 09:47 AM
  #551  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,731
Likes: 47
From: Concord, NC
That truck is so gaudy it isn't even funny... JSVO's looks way better
 
Reply
Old Nov 26, 2011 | 10:01 PM
  #552  
jsvo5695's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2007
Posts: 1,596
Likes: 0
From: kansas city, missouri
Just a heads-up for anyone that bottoms out the rear end on the bed....My ABS light has been on for at least 8 months and after talking to AZ it was because the ABS wire for the rear runs along the top of the rear end. After getting a closer look at the loom the wire was cut in half. I re-attached the wires and rerouted it so it would not get smashed again and without resetting the ECU the light went out.
 
Reply
Old Nov 26, 2011 | 11:43 PM
  #553  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Originally Posted by jsvo5695
Just a heads-up for anyone that bottoms out the rear end on the bed....My ABS light has been on for at least 8 months and after talking to AZ it was because the ABS wire for the rear runs along the top of the rear end. After getting a closer look at the loom the wire was cut in half. I re-attached the wires and rerouted it so it would not get smashed again and without resetting the ECU the light went out.
 
Reply
Old Nov 27, 2011 | 04:24 AM
  #554  
Milt IV's Avatar
Senior Member
15 Year Member
Joined: Oct 2010
Posts: 1,214
Likes: 1
From: DFW TX
Originally Posted by jsvo5695
Just a heads-up for anyone that bottoms out the rear end on the bed....My ABS light has been on for at least 8 months and after talking to AZ it was because the ABS wire for the rear runs along the top of the rear end. After getting a closer look at the loom the wire was cut in half. I re-attached the wires and rerouted it so it would not get smashed again and without resetting the ECU the light went out.
Good info. Thanks for the heads up.
 
Reply
Old Dec 1, 2011 | 12:50 PM
  #555  
jsvo5695's Avatar
Thread Starter
|
Senior Member
Joined: Aug 2007
Posts: 1,596
Likes: 0
From: kansas city, missouri
Maybe you guys can help me out a little. I have seen some 09+ side emblems that are red and black but I don't remember where. Tasca maybe? Any help would be appreciated!!
 
Reply



All times are GMT -4. The time now is 04:35 PM.