Show off your street trucks !!

Thread Tools
 
Search this Thread
 
Old Sep 7, 2011 | 03:13 AM
  #3226  
SLW-SVT's Avatar
TRUCK OF THE YEAR - 2011
Truck of the Month
Joined: Mar 2011
Posts: 563
Likes: 2
From: Lake Jackson, TX
Originally Posted by 01 gt f150

I have had some negative comments thrown in my direction about
this truck. My sons and me built this from scratch. It corners on rails
and gives trucks with a LTR bigger engine a bad day.
not my thing but here are some things to consider that might help you out:
http://www.dgmotorsports.com/product...=50-21-1058-GT


http://buystifflers.com/lightningcha...gsystem-3.aspx
 
Reply
Old Sep 7, 2011 | 04:04 AM
  #3227  
01 gt f150's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
Thanks.. I have been holding off on the side skirts because most of them are not my style. The set you linked are the ones I have been leaning towards. My driveline is not stock. It is a 2 peice and has a center support bearing with a cross member. Would the hoop still be necessary? I hoola hooped my stock one at 120 on the freeway and snapped the tail housing in half. Needlees to say custom driveline and tail housing.. complete power flush
$1000 bucks later...lol

here is another one
http://www.andysautosport.com/ford/1...s00239941.html
 

Last edited by 01 gt f150; Sep 7, 2011 at 04:20 AM.
Reply
Old Sep 7, 2011 | 04:23 AM
  #3228  
SLW-SVT's Avatar
TRUCK OF THE YEAR - 2011
Truck of the Month
Joined: Mar 2011
Posts: 563
Likes: 2
From: Lake Jackson, TX
Originally Posted by 01 gt f150
Thanks.. I have been holding off on the side skirts because most of them are not my style. The set you linked are the ones I have been leaning towards.
here is another one
http://www.andysautosport.com/ford/1...s00239941.html
definitely DGM!
 
Reply
Old Sep 7, 2011 | 10:42 AM
  #3229  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Originally Posted by 01 gt f150
Thanks.. I have been holding off on the side skirts because most of them are not my style. The set you linked are the ones I have been leaning towards. My driveline is not stock. It is a 2 peice and has a center support bearing with a cross member. Would the hoop still be necessary? I hoola hooped my stock one at 120 on the freeway and snapped the tail housing in half. Needlees to say custom driveline and tail housing.. complete power flush
$1000 bucks later...lol

here is another one
http://www.andysautosport.com/ford/1...s00239941.html
that is not a drive shaft loop, its to stiffen the frame and also acts as a drive shaft loop. it would help you in the turns
 
Reply
Old Sep 7, 2011 | 01:20 PM
  #3230  
01 gt f150's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
I will have to put that on the wish list... which seems to never get any shorter..lol
 
Reply
Old Sep 8, 2011 | 06:36 PM
  #3231  
97madness's Avatar
Senior Member
Joined: Jun 2010
Posts: 739
Likes: 0
Updates to the lowfiddy!

Name:  100_0756.jpg
Views: 401
Size:  121.1 KB
Name:  100_0764.jpg
Views: 362
Size:  170.7 KB
Name:  100_0766.jpg
Views: 396
Size:  206.8 KB
 
Reply
Old Sep 8, 2011 | 07:59 PM
  #3232  
c_ulater's Avatar
Senior Member
Joined: Jun 2007
Posts: 1,250
Likes: 0
From: Northern California
Very nice Justin
 
Reply
Old Sep 8, 2011 | 08:02 PM
  #3233  
01 gt f150's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
Awesome looking truck!! Are driving lights made by Pilot?
 
Reply
Old Sep 8, 2011 | 08:05 PM
  #3234  
azmidget91's Avatar
Senior Member
Joined: Jun 2006
Posts: 4,719
Likes: 0
From: Maricopa, AZ
Looks awesome in this pic

Name:  100_0764.jpg
Views: 399
Size:  170.7 KB
 
Reply
Old Sep 8, 2011 | 08:49 PM
  #3235  
97madness's Avatar
Senior Member
Joined: Jun 2010
Posts: 739
Likes: 0
Thanks guys

Originally Posted by 01 gt f150
Awesome looking truck!! Are driving lights made by Pilot?
I think so. Grabbed them from Autozone. Probably gonna end up with some clear ones eventually
 
Reply
Old Sep 8, 2011 | 08:59 PM
  #3236  
01 gt f150's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
4 inch right. Pia extremes Part # 510. the plastic rock grills come off. Those are the same lights in my grill. Bright as hell too. They have them in clear or flutted glass. Clear would match your heads and corners. Shop around. I have seem them as high as $300.0 I found mine on Ebay for around $60.00.
 
Reply
Old Sep 9, 2011 | 01:23 AM
  #3237  
migdaddy's Avatar
Senior Member
Joined: Feb 2009
Posts: 4,624
Likes: 1
From: Boise, ID
that front end is the ****. I would get clear fogs though.
 
Reply
Old Sep 9, 2011 | 09:36 AM
  #3238  
TruckGuy24's Avatar
Senior Member
15 Year Member
Liked
Loved
Joined: Jan 2009
Posts: 10,731
Likes: 47
From: Concord, NC
Damn
 
Reply
Old Sep 9, 2011 | 01:15 PM
  #3239  
97madness's Avatar
Senior Member
Joined: Jun 2010
Posts: 739
Likes: 0
Yes clear fogs will be in the very near future. before she gets put away for winter storage. Thanks guys
 
Reply
Old Sep 9, 2011 | 02:24 PM
  #3240  
01 gt f150's Avatar
Senior Member
Joined: Aug 2007
Posts: 1,867
Likes: 9
What brackets did you use for the lights? O.E. lightning or custom?
 
Reply



All times are GMT -4. The time now is 07:40 PM.