Dual 12" subs enclosed in 2006 Lincoln Mark LT
#16
Pizzaman711,
I have 2-fosgate 10''-subs, can't remember the box dimensions (looks like the box, with hot linky above) the box simply slides under seat, really nice and clean.
DD-kenwood-4-new, I forget the amp, but it's enough (prob to much), I know the amp has been dialed down. I wanted everything clean so I had it all installed.
The last install job I did for myself was ok, but lacked alittle in the asthetics department.
I'll post a few pics in a few mins.
also, good to hear someone else chime in, wasn't sure about the 12''. I'm working right now, gotta buzz in and out, so it was oversight on my part regarding previous info in the post.
any pics on your setup?
I have 2-fosgate 10''-subs, can't remember the box dimensions (looks like the box, with hot linky above) the box simply slides under seat, really nice and clean.
DD-kenwood-4-new, I forget the amp, but it's enough (prob to much), I know the amp has been dialed down. I wanted everything clean so I had it all installed.
The last install job I did for myself was ok, but lacked alittle in the asthetics department.
I'll post a few pics in a few mins.
also, good to hear someone else chime in, wasn't sure about the 12''. I'm working right now, gotta buzz in and out, so it was oversight on my part regarding previous info in the post.
any pics on your setup?
Last edited by Stinger1234; 04-18-2013 at 12:02 AM.
#17
What rockford fosgate subs are they?
Nah no pics, it's nothing spectacular looking haha. The specs on it are:
-Alpine 9884 Head Unit
-A single Type-R shallow 12" until I can save up for another
The box is a prefab one (until I have time to build a good box, 5/8" mdf just doesn't hold up like 3/4") that was around .45cf before displacement so I added some polyfill to make up for some space and because it's not on getting full power
-Amp is an old rockford fosgate one from the 90's I had laying around, does around 300rms. (again until I add a second sub at which time it'll be replaced)
-Wiring is all XS Flex 1/0 gauge to a distribution block in the back where it switches to kicker 4 gauge for the amp.
-Big 3 done in 1/0
Nah no pics, it's nothing spectacular looking haha. The specs on it are:
-Alpine 9884 Head Unit
-A single Type-R shallow 12" until I can save up for another
The box is a prefab one (until I have time to build a good box, 5/8" mdf just doesn't hold up like 3/4") that was around .45cf before displacement so I added some polyfill to make up for some space and because it's not on getting full power
-Amp is an old rockford fosgate one from the 90's I had laying around, does around 300rms. (again until I add a second sub at which time it'll be replaced)
-Wiring is all XS Flex 1/0 gauge to a distribution block in the back where it switches to kicker 4 gauge for the amp.
-Big 3 done in 1/0
#18
Im truly sorry, it's been a year since I had them out and looking at them. The boxes they were packaged in are at home. I'm know they have all the great info your asking for.
I know that they bump very well, and the box is very practical/functional.
I waiting on the pics to download to photobucket....so check back and you'll see the box and what not.
ps. I like those wheels, the red beed.... dilly ma boppers are nice....
I know that they bump very well, and the box is very practical/functional.
I waiting on the pics to download to photobucket....so check back and you'll see the box and what not.
ps. I like those wheels, the red beed.... dilly ma boppers are nice....
Last edited by Stinger1234; 04-18-2013 at 12:33 AM.
#19
Im truly sorry, it's been a year since I had them out and looking at them. The boxes they were packaged in are at home. I'm know they have all the great info your asking for.
I know that they bump very well, and the box is very practical/functional.
I waiting on the pics to download to photobucket....so check back and you'll see the box and what not.
ps. I like those wheels, the red beed.... dilly ma boppers are nice....
I know that they bump very well, and the box is very practical/functional.
I waiting on the pics to download to photobucket....so check back and you'll see the box and what not.
ps. I like those wheels, the red beed.... dilly ma boppers are nice....
https://www.f150online.com/forums/19...ld-thread.html
That's a build thread I started a long time ago, hasn't been updated in a while but not much has changed haha.
#20
#21
Last edited by Stinger1234; 04-18-2013 at 12:59 AM. Reason: trying to learn how to post multiple pics, instead of these linkys
#23
have you heard of boston acoustics SPG theyre in odd size like 11' 13' but these subs in my opinion hit hard and sound so badass had a friend run a 11' in his truck with small box and small 450watt mono block alpine amp and this thing hummed...if i had the room id be running one of these and if i didnt have kids and a gf who complained about loud music id have two of them look them up on youtube