I'm in the process of doing a system in my 06 super cab. I'm doing a 10" sundown SD2 in a foxbox powered by a Alpine M500. I will also be doing Cadence 6.5 components up front and cadence 6x8s in the rear powered by a Alpine F300. I already ran all the RCAs, spreader wires and my 0 gauge so when I get the Alpine f300 I will be able to hook everything up. So I'm looking for some input,pics and ideas of ppl that have done a amp rack behind the rear seat.

 

Check out my album for more ideas. Installed in a 2006 SuperCrew.

 

Great Thank you TK5! Do you mount MDF first? If so what do you use self tap screws to screw into the sheet metal?

 

Sound deaden back wall



Fill in gaps with sound absorbing closed cell foam



Add 1/4" thick hard board with a few self tapping screws, add a dab of silicone to screws to seal any potential leaks



Cover with sound deadener



Add amp of your choice



If your amp board is too thick, the rear seat will rub on your amps.

 

Great thanks!! What size self tappers did you use and what size screws did you use to hold your amps?

 

Any more progress on your system? Please post some pics if you don't mind.

[IMG][/IMG]