Just put together a system(subs). Need some help!!

Thread Tools
 
Search this Thread
 
Old Feb 7, 2011 | 12:44 AM
  #1  
silk05f150's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2008
Posts: 222
Likes: 0
From: Beale AFB, CA
Just put together a system(subs). Need some help!!

I just put together a subwoofer system for my truck. I already have an Alpine INA-w900 HU and RF T400.4 amp powering the speakers. Here's what I've put together for the rest of the system:

Amp: Rockford Fosgate Power T1000-1bd

Subs: 2xKicker CVR102 (10CVR102)
10" Dual 2 ohm Comp VR Series Subwoofer (CVR10-2)
* Peak: 800 watts
* RMS: 400 watts
Mounting depth is 5 1/2"

Box: SuperCrew Sound Dual 10" sub box with extra mounting space option bumping it up to 5 7/8".

Distro Block: KnuKonceptz http://www.knukonceptz.com/productDe...?prodID=KNF-12

From the distro block I was gonna run 4guage wire to each amp. Then run 10guage from the RF T1000.1 Amp to the subs.

My buddy back home helped me install the HU/speakers and the RF T400.4 amp... but personally I don't have much experience with this type of stuff. How does this system look? Is there anything components I should swap out or does this look pretty solid? I listen to rock and country with a little rap from time to time. Any input/advice is appreciated!
 

Last edited by silk05f150; Feb 7, 2011 at 01:07 AM.
Reply
Old Feb 7, 2011 | 03:13 PM
  #2  
PaulBlackFX4's Avatar
Senior Member
Joined: Dec 2009
Posts: 312
Likes: 0
From: Henderson, KY
Solid...One of the best amps you can get.
 
Reply




All times are GMT -4. The time now is 04:38 PM.