need sub wiring help?

Thread Tools
 
Search this Thread
 
Old Feb 26, 2010 | 11:06 AM
  #1  
adamragland's Avatar
Thread Starter
|
Member
Joined: Dec 2009
Posts: 65
Likes: 0
need sub wiring help?

im getting ready to wire up my pioneer premier 10" TS-W1008D4 with my old school memphis 500D, the sub is dual 4ohm. whats everyone's recommendations?
 
Reply
Old Feb 26, 2010 | 11:41 AM
  #2  
05RedFX4's Avatar
Technical Article Contributor
Joined: Mar 2005
Posts: 4,387
Likes: 9
From: OH-IO
What are the specs on the amp, and the sub?
 
Reply
Old Feb 26, 2010 | 11:57 AM
  #3  
farmboybrent's Avatar
Registered User
Joined: Dec 2008
Posts: 403
Likes: 0
From: Ponca City, Oklahoma
This might help. http://www.crutchfield.com/learn/lea...rs_wiring.html
 
Reply
Old Feb 26, 2010 | 11:58 AM
  #4  
adamragland's Avatar
Thread Starter
|
Member
Joined: Dec 2009
Posts: 65
Likes: 0
it says its not 1 ohm stable but i know a guy that ran 2 premier 10's on it for about 3 years straight

-Number of Channels : 1
mono -RMS Power
(4 ohms) : 250 watts x 1 -RMS Power
(2 ohms) : 500 watts x 1 -RMS Power
(1 ohm) : Not Stable
Bridged RMS Power : Not Bridgeable
Peak Power Output : 1000 watts
Min. Impedance Unbridged : 2 ohms
Min. Impedance Bridged : Not Bridgeable
THD @ Rated RMS Power : 0.5%
Speaker Level Inputs : No
Amp Preamp Outputs : Yes 1 Pair
Built-in Crossover : LPF(50 - 250 Hz), Subsonic(20 - 50 Hz)
Bass Boost : 0 - 18 dB
Signal-to-Noise Ratio : 95 dB
Fuse Rating : 25A x 2

sub:
10" Dual 4 ohm Premier Champion Series Subwoofer
Power Handling:
Peak: 1200 watts
RMS: 350 watts
Impedance: Dual 4 ohm
Interlaced basalt/carbon fiber reinforced IMPP cone
Cone reinforcement arcs cone design
Wide roll, three-layer fiber woven radial surround
Stamped basket with magnet cover
Copper voice coil with phenol resin coated glass cloth voice coil bobbin
Aramid fiber spider
4-Layer, Long Voice Coil
Frequency response: 20-180 Hz
Sensitivity: 92 dB
 
Reply
Old Feb 26, 2010 | 12:16 PM
  #5  
JJDH's Avatar
Technical Article Contributor
Joined: May 2008
Posts: 1,592
Likes: 1
From: ohio
wire the sub down to 2 ohms http://mobile.jlaudio.com/support_pages.php?page_id=161
 
Reply
Old Feb 26, 2010 | 12:59 PM
  #6  
PorkCereal's Avatar
Senior Member
Joined: Jan 2009
Posts: 688
Likes: 0
From: jax fla
try this
http://www.the12volt.com/caraudio/wo...igurations.asp

Is that an all chrome version? I have the same one and looking for another. Wire the sub down to 2 ohm and enjoy.
 
Reply
Old Feb 26, 2010 | 01:11 PM
  #7  
adamragland's Avatar
Thread Starter
|
Member
Joined: Dec 2009
Posts: 65
Likes: 0
yeah its the all chrome version
 
Reply

Trending Topics

Old Feb 26, 2010 | 01:15 PM
  #8  
PorkCereal's Avatar
Senior Member
Joined: Jan 2009
Posts: 688
Likes: 0
From: jax fla
Nice, ive been using the same one st500d for about 8 yrs now without a problem. Been trying to pick up another so i can run 2 idq12's of of them. Picked up a jbl bp1200.1 but doesnt fit in my truck the way i want to.
 
Reply
Old Feb 26, 2010 | 01:20 PM
  #9  
adamragland's Avatar
Thread Starter
|
Member
Joined: Dec 2009
Posts: 65
Likes: 0
good luck on finding another, i cant part with mine, i bought it from a friend for $50, he had it 2 10's just like i have and they pounded. if your interested, i do have an old orion hcca 225 that i bought off ebay for $100. i've never hooked it up, the guy i bought it from said he tested it, ive never even tested it.
 
Reply
Old Feb 26, 2010 | 02:08 PM
  #10  
PorkCereal's Avatar
Senior Member
Joined: Jan 2009
Posts: 688
Likes: 0
From: jax fla
You stole that one. Ebay has them for 100-150.
 
Reply




All times are GMT -4. The time now is 06:48 PM.