finally beating

Old Dec 28, 2009 | 11:26 AM
  #16  
abervintageman4's Avatar
Senior Member
Joined: Dec 2007
Posts: 1,730
Likes: 0
From: the woodlands tx
Originally Posted by PorkCereal
Cap will help keep the voltage constant but pulling that much power hes going to need more. Im only pulling ~900w system + hid kit and i get dimming really bad with 1 farad cap. My battery is 4 yrs old and ive killed it a few times so im going to have to find a solution myself.
caps are only good if you have no voltage drop to help smooth out the peaks, other than that they are just paper weights IMO, do the big 3 and find a good battery and you will be fine, i have the big 3 and 2 crappy batteries (for now) and my voltage sits at 14.6 at idle
 
Reply
Old Dec 28, 2009 | 12:12 PM
  #17  
PorkCereal's Avatar
Senior Member
Joined: Jan 2009
Posts: 688
Likes: 0
From: jax fla
My voltage at idle is 14+ with low volume. I need to crank it up and turn the hids on and see if im getting a drop.
 
Reply
Old Dec 28, 2009 | 02:55 PM
  #18  
mSaLL150's Avatar
Technical Article Contributor
Joined: Aug 2006
Posts: 7,862
Likes: 0
From: Northern California
Originally Posted by PorkCereal
My voltage at idle is 14+ with low volume. I need to crank it up and turn the hids on and see if im getting a drop.
Like I said, deep cell battery and upgrade the grounds will fix it. I'm nearing 2000w RMS and have no dimming of my HIDs or anything like that.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:54 PM.