13TW5 Sub Box Plans for 04-08 F150 Supercrew
#17
01-01-2018, 07:33 PM
Junior Member
Join Date: Jan 2018
Location: Fl
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I've had a few pm's and questions about the box I built for my 13TW5 so I figured it would be best to start a new thread with the dimensions of the box. I built the box using 5/8" MDF because I couldn't get 3/4" MDF to work with the space I had available. Since I used 5/8" MDF I did put an internal brace in the box and I do not show it in the drawing. With the internal brace and sub displacement subtracted from the net airspace the box is .805 ft^3 which is right on with JL specs. Other than that I think the picture speaks for itself but if there are any questions just ask....... 
Attachment 35949
Attachment 35949
I know this is a pretty old thread and it is definitely helpful. I’m getting prepped to put a 12Tw3 in my 05’ screw I have. Curious as to how your design is still holding up and sounds. The drawing you posted, I am a bit confused on the top photos. I would assume the one on the right would be looking from the drivers side. Any help would be greatly appreciated