ED 11ov.2 clearance

Old May 25, 2009 | 06:25 PM
  #1  
MOford21's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2007
Posts: 1,056
Likes: 0
From: Missouri
ED 11ov.2 clearance

Just saw that Elemental Designs is running a clearance on the 11ov.2 dual 4 ohm version.. Normally $185, going for $75.

Too bad they need a mounting depth of a little over 6 inches...

Looks like a good deal if you have a seat lift though.

http://www.edesignaudio.com/product_...roducts_id=830

Specs:

Qts: .33
Qes: .36
Qms: 3.7
Fs: 22.00Hz
Re: 7.4
Vas: 70L
Mms: 125.0g
Bl: 18.90T*m
SPL: 85dB
Sd: 350cm²
Xmax: 18.3mm
Voice Coil: 50.0mm

Magnet Width: 5.700"
Cutout Diameter: 9.125"
Mounting Depth: 6.125"
Weight: 20lb
Total Height: 6.500"
Displacement: .06 ft³
Outside Diameter: 10.250"

Sealed ( small ) 0.4ft³
Sealed ( ideal ) 0.5ft³
Sealed ( large ) 0.6ft³
Vented ( ideal ) 1.0ft³ Tuned to 30Hz
Vented ( DDLoud) 1.2ft³ Tuned to 35Hz
 

Last edited by MOford21; May 25, 2009 at 06:32 PM.
Reply
Old May 27, 2009 | 05:20 AM
  #2  
Hokieron's Avatar
Senior Member
Joined: Jul 2006
Posts: 250
Likes: 0
They will fit fine in one of the Fox Acoustics boxes without a seat lift.
 
Reply
Old May 27, 2009 | 07:19 PM
  #3  
MOford21's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2007
Posts: 1,056
Likes: 0
From: Missouri
Wonder if they would hit the floor at xmax though.. 18 mm is quite a bit.
 
Reply
Old May 27, 2009 | 08:00 PM
  #4  
Hokieron's Avatar
Senior Member
Joined: Jul 2006
Posts: 250
Likes: 0
I believe you have 1 1/2 inches clearance with that box. I will tell you for sure in a couple of months.

Here you go:

http://www.foxacoustics.com/ProductD...de=F150-210-04
 

Last edited by Hokieron; May 27, 2009 at 08:02 PM. Reason: Added Link
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:05 AM.