What do yall think?
Yes I will post up some pics gladly. I still haven't put the pics of my new stuff on the computer but I do have my old ones handy so I'll post them tomorrow and the rest at a later date. Current setup is 2 d6 tens ported at 30hz. Port fires on back wall a d the subs are in a center console box. I am running them at .5 ohms off an saetwelvehundredD sorry my one key broke. These tens sound amazing and dig deep and sound crystal clear I love them. Blends real good with the rainbows
Yes I will post up some pics gladly. I still haven't put the pics of my new stuff on the computer but I do have my old ones handy so I'll post them tomorrow and the rest at a later date. Current setup is 2 d6 tens ported at 30hz. Port fires on back wall a d the subs are in a center console box. I am running them at .5 ohms off an saetwelvehundredD sorry my one key broke. These tens sound amazing and dig deep and sound crystal clear I love them. Blends real good with the rainbows
Last edited by mSaLL150; Mar 20, 2009 at 04:54 PM.
subs are dirty because I live in west texas and the wind is always blowing. They were sitting on my work bench and got torched with dust. They are upfiring because if I would have dowfired them they would have either hit the floor or the seat wouldnt have been able to fold down all the way.
Msall. I ran them at 2ohms for a while but that SAE1200 only does like 650 or so at 2ohms. The diamonds sounded good but they can take some serious power. So I decided to see what it would do if I wired them at .5. I made sure all of the voltages were safe and went ahead and did it. They really came alive after that and blended great! They're great woofers! I wired them back at 2ohms for the time being until I can rewire everything and get my batcap in there.
Msall. I ran them at 2ohms for a while but that SAE1200 only does like 650 or so at 2ohms. The diamonds sounded good but they can take some serious power. So I decided to see what it would do if I wired them at .5. I made sure all of the voltages were safe and went ahead and did it. They really came alive after that and blended great! They're great woofers! I wired them back at 2ohms for the time being until I can rewire everything and get my batcap in there.
upfiring is more of a sq setup. The only time I would really turn them up was when my back seats were up. There was a gap between the bottom of the seat and the woofers but not by much. it was a really really tight squeeze. Unless the seats where up I would have my subs turned down into the negatives so it wouldn't damage the cones. I never really was happy with the sound of them and got tired of screwing with them. So I threw the bad one away and gave the decent one away and sold the box.
upfiring is more of a sq setup. The only time I would really turn them up was when my back seats were up. There was a gap between the bottom of the seat and the woofers but not by much. it was a really really tight squeeze. Unless the seats where up I would have my subs turned down into the negatives so it wouldn't damage the cones. I never really was happy with the sound of them and got tired of screwing with them. So I threw the bad one away and gave the decent one away and sold the box.
how many cuft do you have per sub for your diamond audios?
they are ported i took out my center console and ran the box from the dash all the way to the back seat. I believe I ended up with 2.4 or so. So right around 1.2 per sub. You could always make it taller and get my airspace out of it though.





