I need some help guys. I'm putting a system in a 96 bronco. The whole system is in, EXCEPT I can't get the Headunit out. It's an old Alpine not, my 9856 an older one, that has a removeable face. It has two rectangular slots on the right side and none on the left. Does anybody know what I can use to get this out. I have the normal radio tools but they won't fit in the slot. I need help as soon as posible b/c the customer is suppose to pick the truck up Monday and the fuel pump went out when we tried to pull it out of the shop (w/ a full tank of gas of course.) So if anybody knows please let me know.

 

not too sure on that particular model, but alpine has a couple of tabs with a little black pronge that moves up and down...one should be on either side, move the black prong to the middle of the tab looking thing and pull it out

 

agreed use a 16 penny nail i had the same prob w/ an older alpine in my stang a couple of years ago

 

Thank-you,Thank-you,Thank-you,Thank-you,Thank-you,Thank-you,Thank-you!!!
You just made a 16 year old girl very excited. She and her dad were riding by my shop and saw the lights on about 5 mins after I got it finished. You would have thought she had won the lottery when she heard it.
Now it's on to the fuel pump.

BTW sorry for posting in the wrong spot I meant to put this in the hu section but put it in the sub section by mistake.

 

Just finished up w/ the truck. When running the power wire the cust hit the fuel shut off switch. Reset that and the truck runs fine.