New 12" Subwoofer Box
Originally Posted by Impact9
I'd love to hear a mag someday. Maybe when I venture north I can listen to your sweet setup.
If I can get this damn noise problem fixed

I was looking through the classifieds and found an Undercover like I want in Kansas City...There is a possibility that I would go and get that. I havent talked to the guy at all, or really taken it to serious, but it could happen
If so maybe we could get together, Smitty too.
Well I got my amp rack finished posted it over in the amp forum. Tell you want a pair of BM12's pushed by a US AMPS XT1600.2 really kicks some serious butt. Gotta find my radio shack SPL meter.
I get to join the BM crew. Replaced my Rl-i with a 12'' BM
Are you porting your 2 12's impact?
PS anyone have installation instructions on the LMI kit? Dconder sent me his kit but forgot to provide instructions <3
-Ben
Are you porting your 2 12's impact?
PS anyone have installation instructions on the LMI kit? Dconder sent me his kit but forgot to provide instructions <3
-Ben
The space is really limited so the only option is really to keep it sealed.
As for the LMI instructions I'll walk you through it just make another thread. Heck might try search someone might have already done instructions here.
As for the LMI instructions I'll walk you through it just make another thread. Heck might try search someone might have already done instructions here.
OMG I have one hell of a headache! I just spent about an hour trying to tune my subs. I just put in a US AMPS XT4000D which is a real monster at 1500w@1 ohm stable.
I just switched because the power draw from running 1100w through my Class A/B XT1600.2 was putting a big drain on the electrical system. That was even with a 250 alternator and the big 3 done. Crazy. I got some thinking to do still ...
I just switched because the power draw from running 1100w through my Class A/B XT1600.2 was putting a big drain on the electrical system. That was even with a 250 alternator and the big 3 done. Crazy. I got some thinking to do still ...
Originally Posted by mmb2
are you sure there is enough room? looks like the subs will slam into the floor?
looks sharp though!
looks sharp though!
Originally Posted by Im_SCrewed
If you look at the rear of the seat, the floor comes up. The small part of his sub box rests on that and it's high enough that the top of Impact's box will be about level with the bottom of the seat. With his seat lift, that gives him about 2.5" of clearance which is plenty for the BMs. It's enough for the Mags, too!

Originally Posted by Im_SCrewed
If you look at the rear of the seat, the floor comes up. The small part of his sub box rests on that and it's high enough that the top of Impact's box will be about level with the bottom of the seat. With his seat lift, that gives him about 2.5" of clearance which is plenty for the BMs. It's enough for the Mags, too!

correct
Originally Posted by Impact9
correct
I got plenty of room under there. Maybe squeeze me in a swimming pool 

http://www.soundsolutionsaudio.com/f...showtopic=8757



