Polks
#1
Polks
Hey guys...well i've decided im going to get some polk momos up front. I guess i'll get some speakers down the road for the rear. Are these the ones i want? thanks
http://search.ebay.com/search/search...500&category0=
http://search.ebay.com/search/search...500&category0=
#2
I really like my Polk MOMO 6500. They sound a lot better than the db series and infinity 6812 I had. A lot of the guys here are going to boast the Rainbows and that's cool if you can afford them but don't let them put you down on the Polk MOMO 6500. Just get a good amp to push them and give them a few days to loosen up and you'll love them.
Oh to mount those you'll either need to cut some mounting plates from 1/2 MDF or use some aftermarket mounting plates. Don't quote me but I think 5 1/4" aftermarket mounting plates will work for this. You'll also want to trim the door panel speaker hole by about 1". The part you'll need to trim is where the panel comes in contact with the door around the factory speaker. I wrapped 1" masking tape around that area and used a dremel and heavy duty cut off disc. Worked like a champ and took like 10 minutes per door.
Oh to mount those you'll either need to cut some mounting plates from 1/2 MDF or use some aftermarket mounting plates. Don't quote me but I think 5 1/4" aftermarket mounting plates will work for this. You'll also want to trim the door panel speaker hole by about 1". The part you'll need to trim is where the panel comes in contact with the door around the factory speaker. I wrapped 1" masking tape around that area and used a dremel and heavy duty cut off disc. Worked like a champ and took like 10 minutes per door.
Last edited by Impact9; 12-03-2006 at 03:52 PM.
#4
#5