i was thinking of putting 3 jl w3v2 powered by a jl 1000/1 amp. what do you peps think about this? is it to much to put in there? and i want to make the speaker box out of fiberglass i dont have a design yet but it will be helpfull you guys help me on how to make the subs hit harder. looking down, to the side ect.
thanks
jose

 

Um, we need more info here for sure.

ie, what it's going in, how much of what you are willing to give up, and what exactly you are going for.

As it stands, you can not fit 3 12s under the rear bench due to a bracket being in the way.

 

i just got my two jl 10w3v2's in but the magnet is touching the back of the box and the speaker is approx 1/8 of an inch not flush (where it would be screwed in)...does the magnet flex when the subs hit or would it be ok if it didnt have room to move...just the face of the subs would flex...is this right? lemme know

 

i am trying to fit them into a reg cab without cutting into it

 

If you have a reg. cab I think the only option you have as far as which direction the sub points, is forward. Unless you have an 04+, which in that case you might be able to fit them downfiring.

333 watts per sub should work fine.

 

but if i do get them to fit how would they hit harder?looking down or to the doors or to the seat please let me know.right now i have 2 12 looking down so they do fit

 

this thread is hilarious