i just put 2 10" jl w0's and a jl 250x1 amp in my 99 extended cab and i love it

 

Anyone with 02's where are you putting your jack?

 

You know, I picked up a single 10w0 this weekend, went to put it in the box I made, the whole just slightly to large for the 10w0, so it never made it in. I'm really happy with the sound of the Premier w1040, even if it's underpowered slightly, so the 10w0 never may make it in.

The original plan was to put a 10w0 in the truck and put the 2 Premiers I have in my car, but I started leaning away from that because I only have 8 guage running in the car and that is not big enough to push watts those 2 Premiers want to be able to be heard in the car, and I don't feel like running any thicker.

 

I have a toolbox so mine might end up there but the my stereo guys think I might be able to put it under the passenger seat in the front. I'll let you know where mine ends up. Im finally getting my stereo putting end.

I hope Im goin to feel the thump from that jl 10 wo in the truck.

 

still tryin to decide on what Im going to put in the box. Does the jl wo 10 thump inside the truck or is it barely heard. I have infinity references in the doors. I will try to run as much power probably from 150 to 200 to it with a mono rockford amp. what do yall think.

 

Still can't answer if the 10w0 thumps in our trucks. I can tell you that 150w rms is slightly over it's limit, but it should handle it and 200w rms is to much for that sub.

When you say thump, do you mean you hear the sub nice and loud, or the sub hits hard enough that your insides feel it?


This what I'm running right now:


Honestly I wish I had more then 100w rms going to it. I used to have a single 12" version in my old truck with 350w rms to it, and I felt that thing hit in my chest.

Still up in the air about using the 10w0 though, it's power ratings is closer to my amp, but I love the Premier ....


If you want to use 150w - 200w rms, you may want to look into another sub though. Maybe a higher end JL.

 

i just want really good clean bass and if i turn it up it won't sound crappy. Little boom would not be bad if you know what i mean.

 

the local audio store was goin to put the rockford p3001 to it

 

Okay, that the 10w0 will do. Just don't go over 150w rms on it.

Look around at amps also. The newer RF amps are not as good as the older ones.

 

The 3001 puts out 300rms, way to much for one.

Unless you are puttin 2 in-perfect then.

If you went with that amp and one w0, you would have to get a 2 ohm and just stick it on one channel(150rms @ 2 ohms)

 

W0's are only 8ohm and 4ohm, I don't think they make them in 2ohm models. So he'd get a 4ohm w0 with either a mono sub or 2-channel bridgeable amp the puts out around 150rms @ 4ohms.

 

how do yall think that is goin to sound.

 

Hey, I have a 02 SCREW with 2 rockford fosgate punch stage 2 10" s behind the rear seat. I chose the behind-the-seat box because i wanted my amp rack under the seat. The box is 5.75 " deep and has .65 c.f. per sub. I had to tighten my mirror to avoid adjusting it every other song. If you go jl, go with the w1's, I think the depth is the same and you'll get a better product. Goto www.subbox.net and they have a list of subs for small sealed boxes. Check it out just to see what else you can put in your box.

GOOD LUCK.

Rockafella..

 

A single jl audio 10 wo sounds awesome with the rockford p3001 in the supercrew box. I highly suggest it if you are looking for some decent bass in the cab.

 

D@mn you. You pushing me to putting that 10w0 in my truck and then putting the 2 Premiers in the car instead of 1 or 2 8's in the rear deck.

Now I'm gonna have to rewire and build larger boxes .....