ATTN PKRWUD re: roller cam conversion
#16
Originally posted by JerryK
Those are the lifter link bars or "dogbones".. get it? The Spider is a stamped piece of steel w/ 8 "arms", 4 to each side. Each "arm" rests on top of a link bar (dog bone) which in turn "holds" the hydraulic roller lifters and prevents them from coming up out of the lifter bore. Hope that helps. There is only 1 spider necessary and it is about 12" long by 10" wide I'm guessing when you measure "arm to arm" and top to bottom.
Jerry
Those are the lifter link bars or "dogbones".. get it? The Spider is a stamped piece of steel w/ 8 "arms", 4 to each side. Each "arm" rests on top of a link bar (dog bone) which in turn "holds" the hydraulic roller lifters and prevents them from coming up out of the lifter bore. Hope that helps. There is only 1 spider necessary and it is about 12" long by 10" wide I'm guessing when you measure "arm to arm" and top to bottom.
Jerry
Last edited by Donate54; 09-26-2002 at 01:13 PM.