Going to attempt Oil Pan Gasket
Thread Starter
|
Member
Joined: Oct 2012
Posts: 28
Likes: 0
Going to attempt Oil Pan Gasket
I've been reading a lot on here about how to do the oil pan gasekt. I have the 95' f150 300 2wd.
I see alot of people saying they can do the job without jacking up the engine, so that will be my first option.
If I can't slip the new gasket on.. what all do I need to do to jack the engine up.
Unbolt engine mounts.
Unbolt tranny mounts?
I hear some people talking about removing the intake tubing? and possibly the radiator at??
Once the pan is loosned where the best place to jack from.
I see alot of people saying they can do the job without jacking up the engine, so that will be my first option.
If I can't slip the new gasket on.. what all do I need to do to jack the engine up.
Unbolt engine mounts.
Unbolt tranny mounts?
I hear some people talking about removing the intake tubing? and possibly the radiator at??
Once the pan is loosned where the best place to jack from.
Senior Member
Joined: Aug 2010
Posts: 1,185
Likes: 0
From: Cabot, AR
Not to send you packing, but www.nloc.net has a few threads on oil pan gasket replacement, without pulling the motor.