I just put a D60 out of an 82 f250 in the rear of my truck. it did not have the speed sensor in the rear so i take it it was in the transfer case well i swapped this rear into my 95 f150 that did have the speed sensor in the 8.8 not the T-case ...... now my question will that transfer case out of the 82 work behind my 300-i6 and 5 speed to regain my speedometer back any input is appreciated ..

 

Your truck requires an ABS sensor in the rear axle for the speedo, cruise, & RABS to work. Read this caption:



It should be easy to find a D60 with ABS, but you'll need to know how many teeth are on the tone ring to calculate the correct conversion constant for your tire size.

You can use any t-case with this mounting pattern:



But the BW1356 is undoubtedly the strongest that will fit in your truck.

 

So basically im screwed.... My dana 60 is already bolted in and the gears and locker in place it does not have a speed sensor or anything in the rear and it came out of a 85- older f250.....

 

Aftermarket speedo with the cable driven speedo oorr swap in a cable speedo from an older dash. Neither are a good fix, but it'll work.
And wheres those picture your promised today haha.

 

sorry lol long day....

 

If you had read that caption, you'd have found this link:
http://www.fordf150.net/forums/viewtopic.php?t=72709
I don't know if he ever got that to work, though. This thread shows 2 methods that work:
http://www.explorerforum.com/forums/...d.php?t=300588
Or, you could just find a D60 housing w/ABS & transfer your guts into it.