i went to get my 96 f150 inspected today and the guy said i would need to replace the front brake line first. so i jacked up the truck and went under there to remove the lines, but i cant get a wrench to fit the nuts is it standerd of metric, and they are so rusted that everything i put on it just slips around

 

I had a hell of a time getting mine off a few months back. You're going to want to use a flare nut wrench because those things love to round off with regular wrenches. I believe the size was 10mm, but I could be mistaken.

 

got them off, but then went i went to bleed the brakes the bleeder screws were frozen in the calipers, so it looks like i need two more of those.

 

If you don't already have a good manual, click the black Bronco in my signature & look in the Brakes & Hubs album.

 

u shouldnt have to much problems with the bleed screws there not tightened to to tight. Just get the right size wrench and turn it the right way.

 

Also im not sure the name but u can get some stuff ur spray on the bolts and it seeps in and eats up all the rust and makes it easy to brake free. It works amazing. Or just ****in hoser down with wd 40

 

PB Blaster...

 

PB Blaster and wait over night.