A little help here
I have recently installed 4.56 gears on my 98 super cab 4x4. I have 305-16's on it and by my calculations need a 23 tooth speedo gear. My question is, where can I get this gear, I have the VSS in the transfer case. DOes Ford sell them and if so what is the part #? Is this even the correct gear for my modifications? Any help would be greatly appreciated. Thanks.
Hey Jeff3021
i have basically the same problem. if you would read my (spedometer off) entry above . I am not sure i just asked the same question. hopfully someone can help us.
Bigern
------------------
i have basically the same problem. if you would read my (spedometer off) entry above . I am not sure i just asked the same question. hopfully someone can help us.
Bigern
------------------
I realize that they should be a vailable from Ford, however I live in a fairly rural area and our dealer in town is LESS than knowledgable about modifications. Any one have a part number or an exact location to purchase the gear? Thanks again.
[This message has been edited by JEFF3021 (edited 05-18-2001).]
[This message has been edited by JEFF3021 (edited 05-18-2001).]
Go to www.steeda.com or www.baumannengineering.com - you can order them online and bypass the whole dealer hassle!
Ian
------------------
99 Expedition EB
5.4l, 4x4, 4.10 LS
WMS Tube, Bassani Cat Back Exhaust, Superchip Flipchip, PIAA Superwhites
[This message has been edited by Ian N (edited 05-18-2001).]
Ian
------------------
99 Expedition EB
5.4l, 4x4, 4.10 LS
WMS Tube, Bassani Cat Back Exhaust, Superchip Flipchip, PIAA Superwhites
[This message has been edited by Ian N (edited 05-18-2001).]


