i was going to put 35's with 4.56's but i am about to buy a new atv. so thats been put off. i have a 3" bodylift and want to put 33's on it. what gears should i get? i was thinking 4.10's.

 

Good choice, unless you decide to go with 35's later on. Depending on what kind of driving you do, and you have a v6, you might just want to do the 4.56's.

 

I also have a V6 and I recently got 33" tires put on (LT285/70/17) running with my stock 3.55 LS. I was told that 4.10's would put me back to around stock if not slightly better. However since my speedometer is off and I lost the power I am going with the XCAL2 to get my power back and recalibrate my speedometer but my next mod will surley be the 4.10's

 

i will add a xcal 2, k&n intake, and exhaust later on. these will be after the atv is paid for, which will be about a year or year and a half. depends on how much i put down. what about 4.30's then?

 

I found this chart to be very helpful in deciding what gears to go with.

http://www.4wheelparts.com/4wp/asset...gear-ratio.htm