how much would it cost for a set of 4.10 gears for a 4x4 f250 w/5.4l?

 

Hello 05_Shadow,

When I looked into putting 4.10's in my 2000 F-150 4x4 is was about $1300 - $1400 for everything.

 

I have a 2000 Expo. 4x4, 5.4L and just replaced my 3.31 gears with 4.10's.

The gears are Yukon brand that I bought from Randy's Ring and Pinion. I spent 750.00 for the gears & install kits and 1000.00 to have them installed.

I had the speedo fixed with a custom program superchip from Troyer Performance.

I hope this helps!

Jeff

2000 Expedition 4X4 XLT
5.4L
K&N FIPK
Gibson cat back
Hellwig Rear Anti Sway Bar
Custom Program Superchip 5-program
NEW Yukon 4.10 rear and Front Diff.
LT265/75/R16 Michelin 10 ply
B&M Trans Temp Gauge
Bilstein Shocks
Amsoil

My Gallery:https://www.f150online.com/galleries....cfm?gnum=4726

 

Expensive...~$1,500

 

Save money and do em yourself. It's not really that hard, just depends on your skill level. I spent less than $50 on tools didn't have a problem. You can always pay a shop $20 to press bearings on and such.