Where is the best place to buy a Roush hood scoop for my '05 F150. Are all Roush scoops the same style or are there choices? Do they mount with screws or double sided tape? Thanks

 

i buy almost everything off ebay.

 

Here is mine, grill, carbon fiber insert and scoop.



Got them all at http://www.roushperformance.com/

 

COOL, How do they mount?

 

i could be wrong, but i believe double sided 3m tape. i was reading about a scoop a little while ago and that's what it said it had... i'm not 100% sure if it was the roush scoop though.

 

how much did you pay for Ford Telescoping trailering mirrors and did you get them from dealer??
they told me they would only sell them if they installed them for $500 each??

 

call mike from woodhouse ford he will get you a bettter price then Roush for the same thing

 

They Tape and 4 bolts so you drill the hood

 

No your right however it also says to drill 4 holes and use the supplied bolts, I did not and have been running around for a year now with just 3M tape holding it on.

Check out this link about the mirrors and install I posted a while ago.
https://www.f150online.com/forums/sh...d.php?t=321297
https://www.f150online.com/forums/sh...d.php?t=298401

http://www.tascafordparts.com//index.do
this is were I ordered mine from, they now list for about $135 each.

See this copy form Tasca parts desk.
Exclamation Price Change Alert .... For once the price went down.
The price on these mirrors has just dropped on March 1st. They are now $134.75 each at www.tascaparts.com.

 

cool... i'll accept 50% right, lol.


i'd be too afraid to drill into my hood so i too would only use the 3M tape.. if the area is prepped well enough, that 3M tape does a great job.

 

The 3M tape should be supplied, along with the screws, whatever you wanna go with. 3M tape isn't the perminant install, and not the most secure. Since its a non funtional scoop I would imagine that the wind going against it may overtime start peeling it up but it will last long. The screws will keep it there for good.

 

Love those mirrors!!!!!!

 

You are right that screws are the way to go for mounting, however you never know what may happen down the road so I used the supplied tape and no bolts. I did have one corner begin to lift, just enough I could slide a credit card through, and it was not the front wind facing it was the rear corner. I completely removed the scoop and purchased (what I consider better then what comes in the kit) 3M tape added more for good measure and reapplied the scoop, no problems to speak of.

Thanks so do I.