Can someone tell the best way to get rid of this ugly dent. On chrome it sticks out like a sore thumb and i hate it.

 

Put a matching one in the other side. It will look factory.

 

Put one of those fake stick on bullet holes right in the middle of the dent and then make up a cool story about it! Or you could just live with it, or replace the bumper, I think those kind of dents are really hard to get out on chromed steel.

 

I think you should be able to acces the back of the bumper from under the trukc. I had one that was tore up inthe back and took a body dolly with the half moon shape in it then placed it agaist the backside then with a small mini sledged started to tap it out. Mine came out pretty nice. If you wanted you could remove the bumper, there is 4 bolts behind the bumper you could un do them and the bumper and lower valance will come off then you could get at it that way. That looks like a pretty small spot. good luck with it.

MP

 

Good place for a bumper sticker!!!




No, really. Get a salveged bumper for it. But check new prices also.

 

Thanks guys! I'll probably try to knock it out first, probably by removing the bumper that way i can actually work with it. If all else fails I'll get a new one, but thanks for the advice